then a Stand-by stays lit.
and place it on the cup shelf.
1. Open the brewing unit by lifting the lid.
2. Place the Service T DISC on the
T DISC holder with the barcode facing
T DISC is secured in the slot to the
right.
3. Now close the brewing unit by pushing
into place.
4. Press the start /stop button.
The cleaning process starts and
dispenses water into the cup.
5. When the process is complete, empty
stand.
! Important:
Repeat steps 4 & 5 another 4 times.
Open the brewing unit, remove the
Service T DISC and store it in the
To Next Page
Loading...
