Bosch THP 2020 A User Manual

1 THP 2020 A Thermal Printer
1.1 Intended use
The THP 2020 A thermal printer is designed and produced for printing information concerning operating
procedures on the fire panel (e.g. daytime operation), also entries stored in the history log, and alarm and fault
messages. (Up to 3 lines per print-out, with 1 line standard print-out and 2 lines additional information.) The
current date and the time are specified. The most recent event is specified at the top.
1.2 Technical data
type thermal printer
print-out alphanumeric
font size (mm) 2.7 ± 0.2
characters per line ≤ 40
speed (lines / s) ≥ 5
paper width (mm) 58
Input voltage (V DC) 10.5 … 29
current consumption (mA / 12 V DC) 600
fuse T1A
interface parallel
baud rate (bit / s) 2400, 9600 (standard)
8 bit data format 1 startbit, 1 stopbit, no paritybit, ASCII-character
monitoring paper end (signal given at least 600 lines before paper end),
tamper contact
dimensions H x W x D (mm) 130 x 160 x 230
Weight (kg) 2
1.3 Rules and conditions
Installation and operation
!
Installation must only be carried out by trained and skilled personnel. Please follow your local
regulations concerning installation. Operation of the devices is not intended for personal, family or
household use and applications.
The devices are supplied by SELV circuits (Safety Extra Low Voltage) in which hazardous voltages are not
generated. Thus, special safety measures are not required.
The THP 2020 A Thermal Printer comes in a frame installation housing. It is connected to the S20 interface of the
IOS 0020 A Communication Module, and supplied by the panel.
F.01U.317.516 Bosch Sicherheitssysteme GmbH
2015.10 | version 1.0 | 1

Bosch THP 2020 A Specifications

General

Brand	Bosch
Model	THP 2020 A
Category	Printer
Language	English

Summary

THP 2020 A Thermal Printer Overview

Intended Use

Describes the purpose of the THP 2020 A thermal printer for printing fire panel operational procedures, logs, and messages.

Technical Specifications

Lists the technical specifications of the THP 2020 A thermal printer, including type, print-out, font size, and interface.

Installation and Operation Rules

Outlines installation and operation rules, safety precautions, and usage guidelines for the THP 2020 A thermal printer.

Troubleshooting and Restrictions

Covers troubleshooting steps, restrictions on usage, and safety warnings for the THP 2020 A thermal printer.

Contact and Manufacturer Information

Provides contact details for the manufacturer, Bosch Sicherheitssysteme GmbH, and importer information.

Product Label and Manufacturing Date

Details information found on the product label and explains how to determine the manufacturing date from the serial number.