Basic settings en-us
35
Basic setting Display
text
Selection Description
infoLight® I:01
1
I:00 - I:01 Switch InfoLight on or off.
While the program is run-
ning, a spot of light is pro-
jected onto the floor below
the appliance door. This
light will not be visible if
the appliance is installed
at eye level with the cabi-
net front fitted flush. If the
appliance door is not com-
pletely closed, the spot of
light will flash. The pro-
gram has ended when the
spot of light is no longer
visible on the floor.
Level "I:00" switches Info-
Light off.
Start cycle SP:00
1
SP:00 -
SP:01
Set a default cycle for
when the appliance is
switched on.
¡ With the setting
"SP:00", the last cycle
selected and the last
additional function se-
lected are set by de-
fault when the appli-
ance is switched on.
¡ With the setting
"SP:01", the standard
cycle is set by default
when the appliance is
switched on.
Signal volume SL:02
1
SL:00 -SL:03 Adjusting the signal vol-
ume.
Level "SL:00" switches
the signal tone off.
Button volume bL:02
1
bL:00 - bL:03 Set the button volume
during operation. Level
"bL:00" switches the but-
ton tones off.
1
Factory setting (may vary according to model)
To Next Page
Loading...
Need help?
General
