en-us Cleaning and maintenance
42
4. Press the locking catches to-
gether and take the coarse filter
upward and out .
5. Clean the filter elements under
running water.
Carefully remove the rim of de-
bris between the coarse filter
and the fine filter.
6. Put the filter system back to-
gether.
Ensure that the locking catches
on the coarse filter click into po-
sition.
7. Insert the filter system into the
appliance and turn the coarse
filter clockwise.
‒ Ensure that the arrow mark-
ings match up.
16.6 Cleaning the spray
arms
Limescale and soiling in the dish-
washing water may block the noz-
zles and bearings on the spray
arms. Clean the spray arms regu-
larly.
1. Unscrew the upper spray arm
and pull down to remove .
2. Pull up the lower spray arm to
remove.
3. Check the outlet nozzles on the
spray arms for blockages under
running water and remove any
foreign objects.
4. Insert the lower spray arm.
a The spray arm clicks into posi-
tion.
5. Insert the upper spray arm and
screw firmly in place.
To Next Page
Loading...
Need help?
General
