21
Replacing the Oven Burner Nozzle
1.
Open the appliance door.
2.
Remove the screws on the bake chamber cover and
lift the front of the bake chamber cover slightly and
then pull it out towards you.
3.
Remove the screws on the bake burner assembly and
pull the burner forwards out of the gas connection.
4.
Unscrew the bake burner nozzle and replace it with the
LP nozzle number 120.
5.
Reinsert the bake burner and screw tight.
6.
Reinsert the bake chamber cover and screw tight.
7.
Fill out the LP conversion label (included) and affix it to
the appliance.
To Next Page
Loading...
Need help?
General
