EasyManua.ls Logo

Bosch Tronic 3000T ES4 - User Manual

Bosch Tronic 3000T ES4
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
6 720 892 061 2019/02 CA
Tronic 3000T
ES 2.5/4/8 CA...
[2] Installation Manual and Operating Instructions
[18] Manuel d'installation et notice d'utilisation

Table of Contents

Questions and Answers

  • K
    Katelyn BushJul 25, 2025
    Why is my Bosch Water Heater water not hot?
    • D
      Dalton HallJul 25, 2025
      If your Bosch Water Heater isn't heating water, first ensure the power supply is on and working. If the indicator light doesn't illuminate, check that the high limit reset button is pushed in. If the light works but the water isn't hot, test for a plumbing crossover by shutting off the cold supply and opening the hot water tap; any continuous flow indicates a crossover that needs correction. As a final step, have a qualified technician test the heating element's resistance (it should be 8-10 ohms); replacement is needed if the readings fall outside this range.
  • E
    Eric HubbardAug 1, 2025
    Why does my Bosch Water Heater water smell?
    • J
      Justin StevensAug 1, 2025
      An odor in your Bosch Water Heater's water may be due to an unusual reaction between the local water and the heater’s anode rod. Inspect the anode rod, as failure to do so may result in damage to the tank and leaks.
  • S
    stephanie43Aug 9, 2025
    Why is the water from my Bosch Water Heater brown?
    • S
      Stephanie JonesAug 10, 2025
      Brown water from your Bosch Water Heater could indicate a “spent” anode rod and possible deterioration of the tank body. Inspect the tank for leaks and check the anode rod.
  • M
    Mary CarpenterAug 16, 2025
    What to do if my Bosch Tronic 3000T ES4 Water Heater is leaking?
    • A
      Amy BrownAug 16, 2025
      If your Bosch Water Heater is leaking, start by checking the water fittings and the T & P fitting on top of the tank. Then, remove the front cover and inspect the heating element gasket. If the tank itself is leaking and the unit is still under warranty, contact Bosch Water Heating to file a warranty claim. Also, inspect the anode rod.

Summary

Explanation of Symbols and Safety Information

Safety Information

Provides crucial safety warnings, cautions, and notices for safe operation and installation.

Information About the Product

Technical Data

Presents key technical specifications such as capacity, voltage, and temperature range.

Installation Instructions

Mounting the Heater

Instructions for properly mounting the water heater on a wall or floor.

Pipe Connections

Guidance on correctly connecting the cold and hot water pipes.

Electrical Connections

Details the requirements for making safe and compliant electrical connections.

Use

Starting and Testing

Maintenance

Inspecting the Anode Rod

Replacement of Parts

Changing the Anode Rod

Changing the Heating Element

Changing the Thermostat

Troubleshooting

Resetting High Limit Switch

Explains how to reset the high temperature limit shut-off device.

Bosch Tronic 3000T ES4 Specifications

General IconGeneral
Capacity4 gallons
Voltage120 V
Wattage1440 W
Installation TypeWall-mounted
Temperature Range65-145 °F
Amperage12 A
Water Connection1/2 inch NPT
Phase1
Recovery Rate6.8 GPH at 90°F rise

Related product manuals