Bosch Universal Rake 900 - Page 17

English | 17
(RCD) with a nominal residual current
of 30 mA or less.
Maintenance
u Always wear gardening gloves
when handling or working near the
sharp tines/blades.
u Keep all nuts, bolts and screws tight
to ensure safe working with the
product.
u Check the grass box frequently for
wear or deterioration.
u Inspect the product and replace
worn or damaged parts for safety.
u Ensure replacement parts fitted are
Bosch-approved.
u Before storing, make sure that the
product is clean and free of residue.
If necessary, clean with a soft dry
brush.
Symbols
The following symbols are important for reading and under-
standing the original instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the product in a better and safer
manner.
SymbolMeaning
Movement direction
Reaction direction
Wear protective gloves
Weight
Switching on
Switching off
Permitted action
Prohibited action
CLICK!
Audible noise
Accessories/Spare Parts
Intended Use
The garden tool is intended for domestic lawn raking, vertic-
utting or aerating.
The garden tool is not intended for hedge cutting, trimming,
shredding, etc.
The garden tool is intended for use at ground level.
Technical Data
Raker/VerticutterUniversalRake 900UniversalVerticut 1100
Article number
3600H8A0..3600H8A1..
Rated power inputW9001100
Cutting widthcm3232
Grassbox, capacityl5050
Cutting system
–Double wound tines
–Pivoting blades
●
–
–
●
Collection systemJet CollectJet Collect
Height of cutmm+10/+5/0/-5+5/0/-5/-10
Weight according to EPTA‑Procedure 01:2014kg10.010.5
Protection class
/ II / II
Serial numbersee type plate on garden tool
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
All values in this manual are measured for usage below or equal to 2000 meters above nominal sea level.
Bosch Power ToolsF 016 L94 116 | (17.02.2021)