English | 13
the machine to and from the area to
be mowed.
u Do not tilt the machine when starting
or switching on the motor.
u Switch on the motor according to the
instructions with feet well away from
rotating parts.
u Do not put hands or feet near or un-
der rotating parts.
u Always stand clear of the discharge
zone when operating the machine.
u Never pick up or carry the machine
while the motor is running.
u When storing, make sure that all 4
wheels of the garden tool stand on
the ground/floor.
u Only lift the garden tool with the car-
rying handle. Use the carrying handle
with care.
u Do not modify the machine. Unau-
thorized modifications can impair
the safety of your machine, lead to
increased noise and vibrations, and
poor performance.
u Regularly inspect the supply cable
and any extension cables. Do not
connect damaged cables to the sup-
ply or touch a damaged cable before
it is disconnected from the supply. A
damaged cable can lead to contact
with live parts. Beware electric
shock hazard.
Leaf Collect
The leaf collect blade has been de-
signed to allow you to pick up autumn
leaves from your lawn. In order for this
functionality to work within optimal
parameters, please note the following:
– Only collect leaves with the ma-
chine set at maximum cutting
height.
– Collect leaves from your lawn only.
– Before collecting leaves inspect
the area where the machine is to
be used and keep people, pets,
glass structures and cars away
from use.
Remove the plug from the socket:
– Whenever you leave the machine.
– Before clearing a blockage.
– Before checking, cleaning or work-
ing on the machine.
– After striking a foreign object. In-
spect the machine for damage and
change the blade as necessary.
– If the machine starts to vibrate ab-
normally (check immediately).
Connecting to the mains
u The voltage of the power source
must correspond with the data on
the type plate of the product.
u We recommend that this product is
only connected into a socket which
is protected by a circuit-breaker that
would be actuated by a 30mA resid-
ual current.
u Only use or replace power supply
cables for this unit which correspond
to the types indicated by the manu-
facturer. See the operating instruc-
tions for the order no. and types.
Bosch Power Tools 1 609 92A 5W7 | (15.07.2020)
To Next Page
Loading...
