Need help?Do you have a question about the Bosch UT-L 48 and is the answer not in the manual?
General| Type | Condensing Boiler |
|---|---|
| Efficiency | 95% AFUE |
| Modulation Ratio | 5:1 |
| Heat Exchanger Material | Stainless Steel |
| Mounting | Wall-mounted |
| Fuel Type | Natural Gas |
| Power | 120V / 60Hz |
Highlights key features and benefits of the UNIMAT UT-L boiler.
Explains basic principles of condensing technology.
Discusses how to best utilize condensing technology.
Lists and describes the components of the UNIMAT UT-L boiler.
Outlines the available versions of the UNIMAT UT-L boiler.
Explains the function principle of the flue gas heat exchanger.
Provides dimensions for flue gas heat exchangers.
Lists main dimensions for the UNIMAT UT-L boiler.
Details dimensions for the integrated ECO 7 heat exchanger.
Provides dimensions for the integrated ECO 6 heat exchanger.
Lists dimensions for the stand-alone ECO 7 heat exchanger.
Lists dimensions for the stand-alone ECO 6 heat exchanger.
Details the boiler's connection types.
Specifies flow and return connection diameters.
Details flue outlet connection specifications.
Describes the flow and return connectors.
Lists key characteristics of the boiler.
Shows pressure loss on the water side.
Presents pressure loss on the hot gas side.
Explains boiler efficiency and standby loss.
Discusses flue gas temperatures under various conditions.
Provides combustion details for the boilers.
Lists operational requirements for the boilers.
Specifies warranty conditions for operation.
Covers fuel types and requirements.
Discusses corrosion protection measures.
Provides guidelines for heating water quality.
Describes the CFB 810 control unit and its module.
Explains the CFB 930 and CFB 910 control units.
Covers safety equipment requirements.
Shows layout of safety components.
Example of a 1-boiler system with control unit.
Example with hydraulic separation.
Outlines general requirements for flue systems.
To Next Page
