Why does my Bosch WAV28KHBSN programme not start?
The Bosch Washer program might not start because the mains plug of the power cord is not plugged in. Connect the appliance to the power supply. Also, the circuit breaker in the fuse box may have tripped, so check it. There might have been a power cut, so check whether the lighting in your kitchen or other appliances are working. Finally, ensure you have pressed the start button.
What to do if my Bosch Washer is leaking?
If your Bosch Washer is leaking, turn off the water tap and call the after-sales service.
Why won't the spin program start on my Bosch WAV28KHBSN Washer?
If the spin program on your Bosch Washer isn't starting, it could be due to a blocked drain pipe or water outlet hose, so clean them. Also, the drain pipe or water drain hose might be caught or jammed, so ensure they are not kinked or trapped. Finally, the unbalanced load detection system may have interrupted the spin cycle because the laundry is unevenly distributed; redistribute the laundry in the drum.
What to do if the door of my Bosch WAV28KHBSN cannot be opened?
If you cannot open the door of your Bosch Washer, open the door using the emergency release.
How to fix a leaking water inlet hose on my Bosch WAV28KHBSN?
If water is leaking from the water inlet hose of your Bosch Washer, it's likely that the hose is not correctly or securely connected. Connect the water supply hose correctly and tighten the screw connection.
What to do if the detergent drawer of my Bosch WAV28KHBSN Washer is not closing properly?
If the detergent drawer of your Bosch Washer has not been pushed in as far as it can go, push the detergent drawer in as far as it will go.
What to do if the water outlet hose is damaged on my Bosch Washer?
If the water outlet hose on your Bosch Washer is damaged, replace the damaged water outlet hose.
What to do if my Bosch Washer displays error code E:60 / -2B?
If your Bosch Washer displays "E:60 / -2B", the unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed. To resolve this, redistribute the laundry in the drum.
Why does the display on my Bosch WAV28KHBSN go out and flash?
If the display on your Bosch Washer goes out and flashes, it's likely because the energy-saving mode is active. Press any button to exit this mode.
Why does the spin cycle run several times on my Bosch WAV28KHBSN?
If the spin cycle on your Bosch Washer runs several times, it is because the unbalanced load detection system eliminates an imbalance by repeatedly redistributing the laundry. This is not a fault, and no action is required.
To Next Page
General
