29
Activating/deactivating Wi-Fi
If your appliance is already connected to your home
network, you can activate or deactivate Wi-Fi on your
appliance.
Ensure that you are in the Home Connect menu.
~ Calling up the Home Connect menu; Page 27
1.
Set the program to position 4.
’©Ÿ (Wi-Fi function) appears in the display.
2.
Press Start/Pause.
If ©Ÿ appears in the display, Wi-Fi is activated on the
appliance. If ©”” appears in the display, Wi-Fi is
deactivated on the appliance.
Notes
▯ If you connect to your home network, Wi-Fi is activated
automatically.
▯ If Wi-Fi is activated, the appliance will not switch off
automatically.
▯ If Wi-Fi is switched off on the appliance, it is not
possible to use the Home Connect app to start or
control the appliance remotely.
▯ If Wi-Fi is switched off and your appliance was
previously connected to your home network, this
connection will be re-established automatically when
Wi-Fi is switched back on.
▯ If you activate this function, the energy consumption
increases.
Resetting your network settings
You can reset all of the network settings.
Ensure that you are in the Home Connect menu.
~ Calling up the Home Connect menu; Page 27
1.
Set the program to position 5.
§“à (reset network settings) appears in the display.
2.
Press Start/Pause.
¢“à appears in the display.
3.
Press Start/Pause.
Note: If you want to operate your appliance via the
Home Connect app again, you will need to reconnect it
to your home network and to the Home Connect app.
Updating the software
You can update the Home Connect software on your
appliance. As soon as a new software update is
available, a message appears in the display: —˜š
Install the update directly via the message in the display
or manually as follows:
Ensure that you are in the Home Connect menu.
~ Calling up the Home Connect menu; Page 27
1.
Set the program to position 6.
—˜š (update) appears in the display. Start/Pause
flashes if a software update is available.
2.
Press Start/Pause.
¢“à appears in the display.
3.
Press Start/Pause.
Note: The software update may take several minutes.
Do not switch the appliance off while updates are being
installed.
To Next Page
Loading...
