Do you have a question about the Bosch WAX32M92 and is the answer not in the manual?
Door color | Grey, White |
---|---|
Door hinge | Left |
Cord length | 2.1 m |
Drum volume | 70 L |
Control type | Rotary, Touch |
Display type | LED |
Loading type | Front-load |
Tub material | Plastic |
Certification | CE, VDE |
Product color | White |
Built-in display | Yes |
Custom panel-ready | No |
Door opening angle | 171 ° |
Appliance placement | Freestanding |
Drum capacity | 9 kg |
Menu languages | German |
Cycle time (max) | 240 min |
Delay start (max) | 24 h |
Residual moisture | 44 % |
Spin-drying class | A |
Maximum spin speed | 1600 RPM |
Noise level (spin) | 70 dB |
Noise level (wash) | 47 dB |
Left-on mode duration | 155 min |
Number of washing programs | 13 |
Cycle time (quick washing program) | 15 min |
Current | 10 A |
Connected load | 2300 W |
AC input voltage | 220 - 240 V |
AC input frequency | 50 Hz |
Energy efficiency scale | A to G |
Power consumption (off) | 0.12 W |
Power consumption (left-on) | 0.5 W |
Water consumption per cycle | 48 L |
Energy consumption washing per cycle | 1.14 kWh |
Depth | 632 mm |
---|---|
Width | 598 mm |
Height | 848 mm |
Weight | 82562 g |
Door diameter | 320 mm |
Depth with door open | 1063 mm |
Use for washing machine-washable fabrics in domestic households up to 4000m altitude.
Appliance usage by children aged 8+, people with reduced abilities, supervised. Keep children and pets away.
Connect to earthed socket, use correct circuit breaker, ensure plug accessibility, check power cord.
Do not operate if damaged, unplug correctly, avoid moisture, use in enclosed spaces.
Repairs by trained staff, use genuine spare parts, avoid steam/high-pressure cleaners.
Remove transit bolts before use to prevent damage. Keep them for transport.
Unscrew and remove screws from vertical and horizontal transport struts.
Connect water inlet hose to tap, check tightness. Secure water outlet hose.
Insert the mains plug into a nearby socket. Ensure compliance with regulations.
Run the first wash cycle without laundry to remove residual water. Use standard washing powder.
Ensure appliance is installed and connected. Press the power button.
Turn programme selector to set programme. Adjust programme settings if necessary.
Open door, place laundry in drum, close door ensuring no laundry is trapped.
Pull out drawer, pour detergent/care product, push drawer back in. Do not use aid for gel/powder.
Press Start/Nachlegen. Drum rotates, load detection occurs. Display shows duration or 'Ready in' time.
Open the appliance door and remove the laundry after the programme has finished.
Press the power button. Wipe gasket dry, leave door and drawer open to dry.