Overview of programmes en
33
Shirt / Blouses
Non-iron shirts or blouses made of cotton, linen, synthetic fibres or
blended fabrics
Notes
■ Shirts/blouses are only given a short spin on the
Easy-Iron (p) setting. Hang them up to dry
while still dripping wet.
–> Self-smoothing effect
■ Use the Delicates / Silk (Delicado / Seda) programme to wash
shirts/blouses made of silk or delicate fabrics.
Max. 2 kg
Ž - 60 °C
0-800** rpm
¦, (, x, T, Ï, Z, p, %,
$, Á
Detergent è, fabric softener è
Down *
Machine-washable fabrics stuffed with down, such as pillows and
duvets; also suitable for items stuffed with synthetic fibres
Note: . Wash large items separately. Use a detergent designed for
delicates and follow the instructions on the item's care label. Use
detergent sparingly.
Max. 2 kg
Ž - 60 °C
0-1200** rpm
¦, ( , Ï, Z, $
Detergent -, fabric softener -
Curtains *
3.5 kg heavy curtains or 25-30 m² lightweight drapes
Notes
■ Shorter rinse and final spin cycles.
■ Use a detergent that is suitable for machine-washing curtains.
■ The Prewash (T) button is set by default. If you do not require
a pre-wash cycle, press the button to deactivate the function.
Max. 3.5 kg
Ž - 40 °C
0-800** rpm
¦, (, x, T, Ï, Z, % , $, Á
Detergent è, fabric softener è
Drum Clean (Limpeza tambor)
Programme for cleaning and caring for the drum and the outer tub,
e.g. before running the first wash cycle, if washing frequently at a
low temperature (40 °C or lower) or if an odour has developed after
a prolonged period of non-use. The Drum Clean indicator lamp
flashes when you use have not used a programme of 60 °C or
higher for a long time.
Notes
■ Run the drum-care programme without any laundry.
■ Use washing powder or a detergent that contains bleach. To
prevent foaming, only use half the amount of detergent
recommended by the detergent manufacturer. Do not use
detergents that are intended for woollens or delicates.
0 kg
80, 90 °C
1200 rpm
Á
Detergent -, fabric softener -
Programme/type of laundry/instructions Settings
* The programmes and additional programme settings are model-dependent. The programmes/settings
that are available can either be selected directly in the control panel or under Additional programmes
Programmes or Options(Menu).
** Max. The maximum spin speed depends on the model and programme
*** Reduced load for the TurboPerfect (() setting