Bosch WAYH890ES - Starching; Dyeing;Bleaching

Overview of programmes en
35
Starching
Note: Laundry should not be treated
with fabric softener.
1. Switch on the appliance.
2. Select the Rinse programme.
3. Pour liquid starch into
compartment v u in accordance
with the manufacturer's instructions
(clean first if necessary).
4. Press the A button.
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the washing machine to
bleach clothes.
Sports / Fitness (Sport ]) *
Sportswear and leisurewear made from microfibre fabrics
Notes
■ Laundry must not be treated with fabric softener.
■ Before washing, clean the detergent drawer thoroughly (manual
compartment) to remove fabric-softener residue.
Max. 2 kg
Ž-40 °C
0-800** rpm
¦, (, x, T, Ï, Z, p, %,
$, Á
Detergent -, fabric softener -
Automatic(Automático) *
Hard-wearing fabrics;
The degree of soiling and the type of fabric are automatically
detected, and the washing sequence and intelligent dosing are
adjusted accordingly.
Max. 6 kg
40 °C
1400** rpm
x, $, Á
Detergent è, fabric softener è
Automatic soft(Auto delicado) *
Gentler treatment of the laundry;
The degree of soiling and the type of fabric are automatically
detected, and the washing sequence and intelligent dosing are
adjusted accordingly.
Max. 3.5 kg
30 °C
1000** rpm
x, $, Á
Detergent è, fabric softener è
Automatic intensive *
More intensive treatment of the laundry;
The degree of soiling and the type of fabric are automatically
detected, and the washing sequence and intelligent dosing are
adjusted accordingly.
Max. 6 kg
60 °C
1400** rpm
x, $, Á
Detergent è, fabric softener è
Programme/type of laundry/instructions Settings
* The programmes and additional programme settings are model-dependent. The programmes/settings
that are available can either be selected directly in the control panel or under Additional programmes
Programmes or Options(Menu).
** Max. The maximum spin speed depends on the model and programme
*** Reduced load for the TurboPerfect (() setting