Bosch Thermotechnology Ltd.
Cotswold Way, Warndon
Worcester WR4 9SW, United Kingdom
worcester-bosch.co.uk
EasyControl, Key and table stand quick guide
26 721 814 556 (2019/08) en
Fig. 5 Scan and register devices
Fig. 6 Installing Key
[en] Important notes on installation/assembly
The installation/assembly must be carried out by a qualified contractor, following
these instructions and in compliance with the applicable regulations.
Noncompliance with specifications can result in material damage and/or personal
injury or fatality.
▶ Check that the contents of the delivery are undamaged. Only fit undamaged
parts.
▶ Follow the applicable instructions for the other system components, accessories
and spare parts.
▶ Before starting any work: disconnect the system from the power supply across all
phases.
▶ Install all parts described for the device concerned.
▶ Do not reuse any parts that have already been fitted and replaced.
▶ Perform the required adjustments, functional tests and safety tests.
▶ Test any joints that carry gas, flue gas, water or oil for leaks.
▶ Document any alterations made.
0010029338-001
E
a
s
yC
o
n
t
r
o
l
6
7
2
0
x
x
xx
x
x
(
2
0
18
/
x
x
)
Q
u
i
c
k i
n
s
t
a
ll
g
u
i
d
e
0010029339-001
To Previous Page
Loading...
Need help?
General
