en Appliance care
42
16.7 Ending the intensive ap-
pliance care programme
1. Add approx. 1½ litres of hot tap
water into the condensation con-
tainer.
Hold the full condensation con-
tainer level so that no liquid spills
out.
2. Insert the condensation container
so that it locks into place.
3. Press Start/ Reload .
a The appliance care programme is
resumed. "End " appears on the
display and a signal tone sounds
once the appliance care pro-
gramme has ended.
4. Pull out the condensation con-
tainer, keeping it level.
5. Empty the condensation container
→Page32.
6. Insert the condensation container
so that it locks into place.
7. Switch off the appliance.
→"Switching off the appliance",
Page30
a The appliance care programme
has been completed.
To Next Page
Loading...
Need help?
General
