18
Check heating system
1.
Check that the drum is empty.
2.
Close the dryer door.
3.
Switch the dryer to the Time Dry program.
4.
Press the Start/Pause button.
5.
After 5-6 minutes press the Start/Pause button and
open the door.
▯ If the interior of the dryer feels warm, the dryer has
been connected properly. Press the center of the
Program Selector to switch off the appliance.
▯ If the dryer does not work, press the center of the
Program Selector to switch off the appliance. Look
in the Troubleshooting section of this user manual
for hints in solving the problem.
Preparing to transport the dryer - step by
step
1.
Press the center of the Program Selector to switch off
the appliance.
2.
Pull out power supply plug.
3.
Place any accessories in the drum.
4.
Close the door and secure with adhesive tape.
5.
Screw the height-adjustable feet of the dryer into the
housing to prevent them from being damaged during
transportation.
To Next Page
Loading...
