en Display
22
Indicator/
symbol
Description Information
Programme status: Continuously lit: Status indicator
Š Drying
ö Dryness level: Iron Dry
» Dryness level: Cupboard Dry
Ò Dryness level: Cupboard Dry
Plus
Q Anti-Crease
-˜- Pause
“Ÿš Program end
‹ ‹ : ‹ ‹ Programme duration Expected programme duration in hours and minutes.
e.g.
ñ 02:45
Programme delay Appears when altering and activating the "Ready in" time
ð Empty the condensation con-
tainer ~ Page 32
■ Empty the condensation container and then reinsert
it.~ Page 32
Then press A (Start/Pause).
■ Clean the filter in the condensation container.
■ If the optional drain hose* is installed, make sure that
the drain hose:
– Is correctly connected. ~ Page 40
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
■ Run the intensive appliance care programme.
■ Check that no debris has found its way into the base
unit. Open the maintenance flap and remove any debris.
å Fluff filter Remove the fluff ~ Page 33
ó
ªªª
Automatic heat exchanger
rinse
Rinsing progress indicator
The heat exchanger is cleaned automatically. Do not pull out
the condensation container or cancel the programme while
this is displayed.
’‘§“ Basic appliance care pro-
gramme
Not a fault. After a certain period, the appliance will automat-
ically recommend that you run the basic appliance care pro-
gramme. Run the basic appliance care programme.
~ Page 49
œ Appliance settings Alter the appliance settings ~ Page 35
To Next Page
Loading...
