Bosch WVG30443SN - Setting the Signal

Setting the signal en
39
MSetting the signal
Setti ng the signal
Setting signal volume
1. Activate setting mode for signal volume
Turn to Off 1 step clockwise Press A Start/Reload
and hold and
1 step clock-
wise
Release
2. a) Set volume for information signals
Press the ñ Finished in
and set Volume
or Set to Off, setting mode
for signal volume is left.
2. b) Selecting volume of the button signals
1 step clockwise Press the ñ
Finished in and
set Volume
Set to Off, setting mode
for signal volume is left