Need help?Do you have a question about the Bosch WZ16 and is the answer not in the manual?
General| Type | CCTV security camera |
|---|---|
| PTZ control | No |
| Day/night mode | Yes |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired |
| Form factor | Bullet |
| Mounting type | Wall |
| Product color | Silver |
| Housing material | Aluminum |
| Protection features | Water resistant |
| International Protection (IP) code | IP67 |
| Maximum resolution | 768 x 494 pixels |
| Supported video modes | - |
| Analog signal format system | NTSC |
| Camera shutter type | Electronic |
| Camera shutter speed | 1/60 - 1/100000 s |
| Minimum illumination | 0 lx |
| Sensor type | CCD |
| Optical sensor size | 1/3 \ |
| Effective sensor resolution | 520 pixels |
| Optical zoom | - x |
| Focal length range | 3.8 - 9.5 mm |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 20 m |
| Number of illumination LEDs | 18 |
| Signal-to-Noise Ratio (SNR) | 45 dB |
| AC input voltage | 24 V |
| Power consumption (typical) | 7 W |
| Operating temperature (T-T) | -30 - 55 °C |
Weight and Dimensions| Length | 145 mm |
|---|---|
| Weight | 560 g |
| Diameter | 60 mm |
General safety guidelines and warnings for product usage.
Specific instructions for safe operation and maintenance.
Explanation and recommendations for system and safety grounding.
Compliance details regarding FCC rules for digital devices.
Overview of the camera's key technological features and capabilities.
Diagram showing the camera's components and their assembly.
Instructions on adjusting camera settings like focus and zoom.
Guide on how to connect the camera to a monitor and power source.
Accessing and navigating the main setup menu for general settings.
Lens settings including DC level, flickerless, and shutter speed.
Adjusting white balance for accurate color reproduction in different lighting.
Setting the automatic gain control level for image brightness.
Switching between color (day) and monochrome (night) modes.
Fine-tuning image parameters like SBLC, DNR, Sharpness, Mirror, Motion, Privacy.
Configuring camera ID, display, title, language, sync, and version.
Resetting camera settings to factory defaults.
Procedure for exiting the On-Screen Display (OSD) setup menu.
A guide to identify and fix common malfunctions.
Information on contacting support for unresolved issues.
Guidelines for unit repair and environmentally sound disposal.
Detailed technical specifications of the camera model.
Physical dimensions and measurements of the camera.
To Next Page
