To Next PageTo Next Page
Need help?Do you have a question about the Bosch Junior and is the answer not in the manual?
General| Environment | Indoor |
|---|---|
| Focal Length | 2.8mm |
| Motion Detection | Yes |
| Storage | MicroSD card (up to 128GB) |
| Weather Resistance | No |
| Connectivity | Wi-Fi |
Key features of the AutoDome Junior HD, including compact dimensions, discreet surveillance suitability, and advanced technology.
Details the camera's 1/2.5-inch CMOS sensor, 1080p resolution, low-light performance, 99 presets, and variable pan/tilt speeds.
Explains the use of H.264 for high-quality streaming video at low bit rates, minimizing bandwidth and storage.
Describes the Quad-streaming feature, delivering H.264 and M-JPEG streams for bandwidth-efficient viewing and recording.
Details compliance with ONVIF Profile S for easy integration with third-party video management systems.
Covers built-in video content analysis and Bosch's Intelligent Video Analysis (IVA) for detecting and tracking moving objects.
Explains how algorithms reduce camera shake for exceptional image clarity without reducing sensitivity.
Highlights the tamper-resistant aluminum housing and rigorous testing, ensuring durability in tough environments.
Enables direct video streaming to an iSCSI RAID array for efficient video storage, independent of network performance.
Allows full camera control and configuration over the network via web browser or Bosch Video Management System.
Features SNMP support for remote monitoring and management of the AutoDome Junior HD camera.
Details technical specifications for the 10x HD Day/Night camera, including imager, lens, focus, iris, field of view, and sensitivity.
Provides sensitivity figures for Day and Night modes with SensUP Off and SensUP On (64x) settings.
Specifies the Electronic Shutter Speed range and Signal to Noise Ratio (SNR) for optimal image capture.
Details Wide Dynamic Range capabilities and various White Balance options for image adjustment.
Outlines software control via web browser or BVMS and the firmware update process.
Details supported streaming standards (H.264, M-JPEG, JPEG) and configurable stream options.
Lists supported resolutions (1080p, 720p, 480p, 240p) and their corresponding frame rates for different streams.
Specifies GOP structure (IP, IBP, IBBP) and the data rate range for video streams.
Provides information on overall IP delay and supported audio codecs (G.711, L16).
Lists supported network protocols (RTP, TCP, UDP, etc.) and Ethernet specifications (10/100 Base-TX).
Details PoE+ compliance (IEEE 802.3at) and built-in iSCSI storage support.
Specifies ONVIF Profile S connectivity and Intelligent Video Analysis (IVA) features.
Covers pan and tilt ranges, variable and pre-position speeds, and preset accuracy.
Details voltage requirements (24 VAC, PoE+) and typical power consumption for indoor and outdoor models.
Specifies operating and storage temperatures, humidity, and environmental ratings (IP54/IP65).
Covers sectors/titling, privacy masking, presets, and guard tours.
Details network connections (RJ-45), alarm inputs/outputs, and audio input specifications.
Provides details on size, bubble size, weight, material (housing/bubble), and color options.
Lists the languages supported by the camera's interface and documentation.
Lists part numbers for various indoor and outdoor AutoDome Junior HD configurations.
Details available accessories like mounting kits, bubbles, power supplies, and their respective part numbers.
Information on the site license for BVIP AES 128-bit encryption, enabling secure communication.
