Need help?Do you have a question about the Bosch AUTODOME IP 4000i and is the answer not in the manual?
General| Optical Zoom | 12x |
|---|---|
| Pan Range | 360° continuous |
| Ingress Protection | IP66 |
| Form Factor | Dome |
| Video Compression | H.265, H.264, MJPEG |
| Ethernet | 10/100 Base-T |
| Vandal Resistance | IK10 |
| Resolution | 1080p |
| Power | PoE (IEEE 802.3af) |
| Operating Temperature | -30 °C to +60 °C (-22 °F to +140 °F) |
| Environment | Outdoor |
| Sensor Type | 1/2.8-inch CMOS |
| Aperture | F1.6 to F4.4 |
| Day/Night | Yes |
| WDR | 120 dB |
| Bit Rate | Up to 10 Mbps |
| Frame Rate | Up to 30 fps |
| Audio | 2-way audio |
| Lens Type | Motorized |
Lists the recommended computer hardware, operating system, and network access for browser connectivity.
Provides instructions on obtaining an IP address and connecting to the unit via a web browser.
Covers live video viewing, connection, PTZ, pre-positions, AUX control, recording status, and more.
Details on viewing, searching, and exporting recorded video streams through the browser interface.
Covers frame rate, image rotation, mirror image, coding, LED, reboot, and factory defaults.
Describes camera location, field of view, and calibration methods for VCA.
Manages PTZ settings, scene mode scheduler, encoder profiles, and pre-position tours.
Overview of recording options, iSCSI and local media connection, and management.
Configures alarm response, destination IPs, and video content analysis parameters.
Sets up audio alarms based on sound and sends alarm notifications via email.
Handles firmware updates, upload history, configuration backup, and maintenance logs.
To Next Page
