Need help?Do you have a question about the Bosch AUTODOME IP starlight 5100i IR and is the answer not in the manual?
General| Low-light Performance | Starlight technology |
|---|---|
| Video Compression | H.265, H.264, MJPEG |
| Ingress Protection | IP66 |
| Environment | Outdoor |
| Impact Protection | IK10 |
| Frame Rate | Up to 60 fps |
| Resolution | 1920 x 1080 (Full HD) |
| IR Illumination | Yes |
| Power | 24 VAC |
| Operating Temperature | -40 °C to +60 °C (-40 °F to +140 °F) |
| Features | Intelligent Video Analytics |
| Sensor Type | 1/2.8" CMOS |
Provides information regarding the manual's content, accuracy, and potential changes over time.
Details copyright ownership and trademark usage for the product and its documentation.
Explains the meaning of symbols (Danger, Warning, Caution, Notice) used to highlight safety information.
Lists critical safety guidelines for installation, operation, and maintenance to prevent hazards.
Describes how to connect the device using 24 VAC or PoE power sources.
Covers specific usage notices, compliance information (FCC, ICES), and disclaimers.
Addresses safety precautions related to IR illumination and potential optical radiation hazards.
Provides contact details and procedures for obtaining technical support and service.
Lists all components included in the camera package for verification upon unboxing.
Specifies external items necessary for the camera's installation and operation.
Lists tools that are not supplied with the product but are needed for installation.
Details steps for connecting the camera to the network and obtaining an IP address.
Guides users on configuring the camera using the Bosch Project Assistant mobile application.
Provides a general overview and safety advice for setting up the camera for configuration.
Step-by-step instructions for configuring the camera using its packaging as a temporary stand.
Instructions for attaching the pendant wall mount to the surveillance cabinet and managing cables.
Details on securing the mounting cap and connecting the camera for the pendant wall mount.
Guidance on mounting the camera on a roof parapet, including surface preparation and bracket attachment.
Steps for attaching the mounting cap and camera to the roof mount assembly.
Steps for preparing the ceiling or mounting structure for pipe mount installation.
Instructions for attaching the mounting cap and camera to the pipe mount.
Instruction to pass the unit along with its installation guide for future use.
Guidelines for proper and environmentally compliant disposal of the electronic device.
To Next Page