AUTODOME IP starlight 5100i IR Safety | en 7
Bosch Security Systems
Installation Manual
2021-02-19 | 0.7 |
1.5 Connection in applications
24 VAC power source: This unit is intended to operate at 24 VAC (if PoE is not available).
User-supplied wiring must be in compliance with electrical codes (Class 2 power levels).
PoE: Use only approved PoE (802.3bt) devices. Power-over-Ethernet can be connected at the
same time as a 24 VAC power supply. If auxiliary power (24 VAC) and PoE are applied
simultaneously, the camera selects PoE and stops auxiliary input.
To Next Page
Loading...
