How to stop false alarms caused by reflections on Bosch Security System?
To address false alarms in your Bosch Security System triggered by reflections of moving objects, such as the shadow of a moving tree, try decreasing the sensitivity for flame detection.
What to do if Bosch Security System has short false alarms for flame detection?
To prevent short false alarms for flame detection in your Bosch Security System, increase the Verification time [sec] for flame detection.
What to do if continuous motion causes false alarms in Bosch Security System?
If your Bosch Security System triggers false alarms due to continuous motion, like that of escalators, consider adding a smoke mask. This will deactivate smoke detection within the masked area.
How to fix false alarms from small flames detected by Bosch Security System?
If your Bosch Security System is producing false alarms because of small bounding boxes of flame detection, increase the Min. Size for flame detection.
How to prevent false alarms from temporary motion on Bosch Security System?
If temporary motion is causing false alarms in your Bosch Security System, such as from a roller shutter, add a smoke time region mask. This delays smoke detection in the masked region.
How to stop flickering motion triggering Bosch Security System?
If objects are causing flickering motion and triggering your Bosch Security System, for example, the shadow of a flag in the wind, add a flame mask. This will deactivate flame detection in that specific masked area.
General| Camera Type | IP camera |
|---|---|
| Environment | Indoor/Outdoor |
| Sensor Type | CMOS |
| Aperture | F1.0 |
| Night Vision | Yes |
| Wide Dynamic Range | Yes |
| Operating Temperature | -40°C to +60°C |
| IP Rating | IP66 |
| Weight | 1.2 kg |
| Light Sensitivity | Starlight technology |
| Lens | Fixed |
| Focal Length | 2.8 mm |
| Day/Night | Yes |
| Video Compression | H.265, H.264 |
| Audio | Two-way audio |
| Power Supply | PoE (Power over Ethernet) |
To Next Page
