Camera mounting
Mounting variants
Due to the provided mounting bracket, the camera can be easily mounted. There are three
main mounting variants to install the camera.
Figure 5.1: Mounting variants
A Ceiling mount
B Wall mount
C Stand mount
Chose the right mounting variant for your application and mount the device according to the
following options:
1. Install the mounting bracket.
2. Attach the camera to the bracket and tighten the camera lock ring.
3. Adjust the angle of the camera to set the field of view.
4. Tighten the mounting bracket lock ring to fix the camera in the desired position.
Setting the field of view
After the camera is mounted to the surface, the field of view can be set.
5.2
5.3
AVIOTEC IP starlight 8000 Installation | en 27
Bosch Sicherheitssysteme GmbH Operation manual 2017.06 | 6.0 | F.01U.318.200
To Next Page
Loading...
