Do you have a question about the Bosch AUTODOME IP starlight 7000i Series and is the answer not in the manual?
Video Compression | H.265, H.264, MJPEG |
---|---|
Ingress Protection | IP66 |
Operating Temperature | -40°C to +60°C |
Iris | Auto Iris |
Pan Range | 360° continuous |
Tilt Speed | Up to 200°/s |
Frame Rate | Up to 60 fps |
Impact Protection | IK10 |
Low Light Performance | Starlight technology for exceptional low-light sensitivity |
Intelligent Video Analytics | Built-in Intelligent Video Analytics (IVA) |
IR Distance | Not applicable (no IR illumination) |
Audio | Two-way audio |
Power | 24 VAC, PoE+ (IEEE 802.3at) |
Specifies hardware and software for camera operation.
Details on connecting the camera to a network.
Securing camera access with a password.
Displays live video stream and controls the unit.
Used to configure the unit and application interface.
Settings for device name, ID, host naming, etc.
Managing user accounts and authorization levels.
Setting the camera's date, time, and time zone.
Customizing the web interface language and logos.
Adapting live page display and controls.
Main menu for camera configuration.
Camera location and perspective calibration for VCA.
Selecting image parameters for different scenarios.
Adjusting color, exposure, and gain.
Blocking specific areas from the video feed.
Configuring pan, tilt, zoom, and auto-pivot features.
Managing storage media like iSCSI and SD cards.
Defining characteristics for recording tracks.
Scheduling recording profiles by day and time.
Configuring camera responses to alarms.
Setting up video analytics for event detection.
Defining rules for inputs activating outputs.
Activating or deactivating network services.
Configuring IP addresses and network integration.
Setting up dynamic DNS for remote access.
Updating firmware and performing maintenance.
Running built-in self-tests for status.
Accessing live video, PTZ controls, and pre-positions.
Viewing, searching, and exporting recorded video.