EasyManua.ls Logo

Bosch AVIOTEC 8000i IR User Manual

Bosch AVIOTEC 8000i IR
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AVIOTEC 8000i IR
Firmware 8.81
en
User manual

Table of Contents

Other manuals for Bosch AVIOTEC 8000i IR

Questions and Answers:

Bosch AVIOTEC 8000i IR Specifications

General IconGeneral
ModelAVIOTEC 8000i IR
CategorySecurity Camera
ManufacturerBosch
IR IlluminationYes
Fire DetectionYes
Camera TechnologyIP
Frame RateUp to 60 fps
Intelligent Video AnalyticsYes
Ingress ProtectionIP66
Impact ProtectionIK10
Resolution1920 x 1080 pixels
Image Sensor1/2.8 inch CMOS
Video CompressionH.265/H.264/MJPEG
LensVarifocal
IR RangeUp to 30 m
AudioTwo-way audio
Operating Temperature-30°C to +60°C
ComplianceUL 268

Summary

Safety Instructions

General Safety Messages / Notices

General safety messages and notices regarding the video-based fire detection system.

Installation

Requirements

Lists prerequisites and considerations for installing the camera.

Configuring the camera before installation

Steps for preparing camera configuration before on-site installation.

On-site commissioning

Procedures for commissioning the camera after physical installation.

Wiring of the camera

Instructions on connecting the camera for power and data transmission.

Network and PoE power - RJ45

Details the connection of the camera via RJ45 for network and power.

Access to the device

Configuration Manager

Guides on using the Configuration Manager for camera settings.

Adjustment of detection settings

General settings

Covers general parameters for fire detection, including illumination and sensitivity.

Adjustments of image regions

Explains how to define specific areas for detection or deactivation.

Relay settings

Configuration of the camera's built-in relays for alarm and trouble outputs.

Troubleshooting

False Alarms

Addresses common issues leading to false alarms in detection settings.

False alarms under 4 seconds concerning the whole detection area

Solutions for short false alarms affecting the entire detection area.

False alarms at small constant areas

Solutions for false alarms occurring in specific image areas.

Vibrations at the camera site

Troubleshooting steps for issues caused by camera vibrations.

No alarm transmission

Resolving issues where alarms are visible but not transmitted.

No fire detection

Steps to diagnose and resolve instances where no fire is detected.

Image quality

Addresses problems related to image quality and interference.

Maintenance

Related product manuals