AVIOTEC 8000i IR Maintenance | en 55
Bosch Sicherheitssysteme GmbH
User manual
2023.10 | 02 | F.01U.414.168
10 Maintenance
10.1 Cleaning
It is generally sufficient to use a dry cloth for cleaning, but a moist lint-free cloth or leather
shammy may also be used.
Do not use liquid cleaners or aerosol cleaners.
It is important to keep the lens clean to ensure optimum performance. Dust, grease, or
fingerprints should be removed from the lens surface. When cleaning the lens, take extra
care not to damage the special coating used to reduce light reflections.
– Remove dust with a blower-brush or grease-free soft brush.
– Wipe water drops off the lens with a clean soft lint-free cloth and dry the lens surface.
– Use special lens cleaning paper or cloth treated with lens cleaning fluid to gently wipe
off any remaining dirt (wipe spirally from the lens center towards the edge).
10.2 Repair
Notice!
Never open the casing of the unit
The unit does not contain any user-serviceable parts. Refer all repairs to suitable qualified
specialists.
10.3 Reset
Use the factory reset button to restore the unit to its original settings. Any changes to the
settings are overwritten by the factory defaults. A reset may be necessary, for example, if
the unit has invalid settings that prevent it from functioning as desired.
10.4 Maintenance intervals
Notice!
Maintenance and inspection work should be carried out regularly and by trained personnel.
The following inspections are recommended:
Testing Inspection frequency
Item to inspect annually quarterly regularly
Visual check of the
mounting
X
Visual check for
damage
X
Check the camera
lens for pollution and
damage
X
Functional check X
To Next Page
Loading...
