Bosch AVIOTEC 8000i IR - System Overview; Camera; Power Supply

AVIOTEC 8000i IR System overview | en 15
Bosch Sicherheitssysteme GmbH
User manual
2023.10 | 02 | F.01U.414.168
3 System overview
Video-based fire detection is the system of choice when reliable video motion fire detection
is needed. Subject to the installation and operating conditions explained in this manual, it
can, for example, supplement traditional fire detection systems or provide means of fire
detection where traditional fire detection systems are technically limited. AVIOTEC 8000i IR
operates as stand-alone unit and doesn’t need a separate evaluation unit.
Alarms are shown with a red rectangle in the camera image and are identified with a flame
or smoke symbol for differentiation.
3.1 Camera
3.1.1 Power supply
i
Notice!
Use only Power-over-Ethernet (PoE) approved devices.
AVIOTEC 8000i IR offers you two possible power supplies:
– Power-over-Ethernet (PoE)
– 12-26 VDC/24 VAC input
Power-over-Ethernet (PoE) can be connected at the same time as a power supply. If
auxiliary power and PoE is applied simultaneously, the camera selects PoE and shuts off the
auxiliary input.