What to do if my Bosch AVIOTEC 8000i IR Security Camera has short false alarms for smoke detection?
If your Bosch Security Camera is experiencing short, false alarms when detecting smoke, try increasing the duration of smoke detection. You can do this by adjusting the Smoke > Verification time [s] setting.
General| Model | AVIOTEC 8000i IR |
|---|---|
| Category | Security Camera |
| Manufacturer | Bosch |
| IR Illumination | Yes |
| Fire Detection | Yes |
| Camera Technology | IP |
| Frame Rate | Up to 60 fps |
| Intelligent Video Analytics | Yes |
| Ingress Protection | IP66 |
| Impact Protection | IK10 |
| Resolution | 1920 x 1080 pixels |
| Image Sensor | 1/2.8 inch CMOS |
| Video Compression | H.265/H.264/MJPEG |
| Lens | Varifocal |
| IR Range | Up to 30 m |
| Audio | Two-way audio |
| Operating Temperature | -30°C to +60°C |
| Compliance | UL 268 |
To Next Page
