Bosch AVIOTEC 8000i IR - Access to the device; Configuration Manager; Access via web interface

42 en | Access to the device AVIOTEC 8000i IR
2023.10 | 02 | F.01U.414.168
User manual
Bosch Sicherheitssysteme GmbH
6 Access to the device
6.1 Configuration Manager
i
Notice!
Camera settings should preferably be made in the Configuration Manager, as advanced
functionalities are available there.
You can get access to the camera via Configuration Manager available at https://
downloadstore.boschsecurity.com/ .
The unit must have a valid IP address and a compatible subnet mask to operate on your
network.
6.2 Access via web interface
1. Open the Internet Browser.
2. Enter the IP address of the camera to get access to the web interface.