Bosch AVIOTEC 8000i IR - Fire Alarm Control Panel

AVIOTEC 8000i IR Camera integration | en 39
Bosch Sicherheitssysteme GmbH
User manual
2023.10 | 02 | F.01U.414.168
5.4 Fire Alarm Control Panel
AVIOTEC 8000i IR can be connected to the a fire alarm control panel. Alarms and troubles
will be triggered by relay outputs of the camera. There are two separate relays for alarm and
trouble.
i
Notice!
No direct connection to fire services in EN54 compliant installations.
Authorities can allow a connection to fire services after verifying alarms in a monitoring
center. Please consider local regulations.
Connection to a fire alarm control panel
The alarm output of the camera can be connected to a fire alarm control panel.
The camera alarm output is triggered by a relay that is normally open. In case of alarm the
relay is closed.