54 en | Troubleshooting AVIOTEC 8000i IR
2023.10 | 02 | F.01U.414.168
User manual
Bosch Sicherheitssysteme GmbH
2. Type ping followed by the IP address of the device.
If the device is found, the response appears as "Reply from ... ", followed by the number of
bytes sent and the transmission time in milliseconds. Otherwise, the device cannot be
accessed via the network. This might be because:
– The device is not properly connected to the network. Check the cable connections in
this case.
– The device is not correctly integrated into the network. Check the IP address, subnet
mask, and gateway address.
To Next Page
Loading...
