Bosch AVIOTEC IP starlight 8000 - Page 26

To attach the lens to the camera:
1. Remove the sensor protection cap from the camera.
2. Remove the protection cap from the lens.
3. Screw the lens onto the camera.
Plug the lens connector into the camera (it automatically detects the type of lens).
Pin
DC iris lens
1 Damp -
2 Damp +
3 Drive +
4 Drive -
26 en | Installation AVIOTEC IP starlight 8000
2017.06 | 6.0 | F.01U.318.200 Operation manual Bosch Sicherheitssysteme GmbH