AUTODOME IP starlight 5100i IR Installing a Pendant Wall Mount and Camera | en 23
Bosch Security Systems
Installation Manual
2021-02-19 | 0.7 |
9 Installing a Pendant Wall Mount and Camera
9.1 Installing a Pendant Wall Mount (with the Surveillance Cabinet)
1. Slide the mounting flange over the wall mount.
2. Attach the wall mount to the mounting flange and fix them on the front door of the Wall-
mount Surveillance Cabinet by using four M5 screws.
3. Make sure that the total length of cable is between 150 mm and 200 mm (0.49 ft and
0.66 ft).
>15cm
<20cm
NDA-U-WMT
NDA-U-PAx
To Next Page
Loading...
