Need help?Do you have a question about the Bose Sicilia Entero ESC and is the answer not in the manual?
General| Brand | Bose Sicilia |
|---|---|
| Model | Entero ESC |
| Category | Security System |
| Language | English |
Defines four access levels for operating and configuring the VACIE.
Details how controls and indications are accessed at different levels.
Describes POWER, SYSTEM FAULT, GENERAL ERROR, and ALARM indicators on the ESC.
Describes 230Vac, 48Vdc, ALARM, ERROR, and Panel Disabled indicators.
Details PROTECT, 230Vac, 48Vdc, and ERROR indicators on the ESA amplifier.
Details 230Vac INPUT, 48Vdc INPUT, and 48Vdc OUTPUT indicators on the EPC.
Explains LCD display, indicators, and navigation buttons for the ESC.
Details information displayed on the ESC's main screen during normal operation.
Lists available menu items within the ESC's system menu.
Shows status of external contacts, inputs, wall controllers, and emergency panels.
Describes how to acknowledge and review system errors.
Explains how to perform a test of all indicators and the internal buzzer.
Details the process of resetting errors and their impact on indicators.
Lists available settings and functions within the installation menu.
Displays outputs currently in test mode and their status.
Describes how to configure audio input sensitivity and gain.
Details adjusting input sensitivity and gain values for audio inputs.
Explains how to adjust output gain and emergency gain levels.
Guides on setting up line monitoring for speaker lines.
Shows stored and actual load for speaker lines at different frequencies.
Explains how to temporarily disable speaker line monitoring for maintenance.
Details 1kHz auto measurement and deviation settings for speaker lines.
Guides on clearing calibration, calibrating outputs, and setting pilot frequency.
Describes how to link an output to the previous output.
Guides on calibrating unit components like inputs, outputs, and panels.
Allows adjustment of input levels for emergency signals and alarm messages.
Displays active errors and allows individual error reset.
Provides the option to clear the entire error log.
Describes the main controls and indicators on the panels.
Explains the operation of the Lamp Test and Reset Buzzer buttons.
Explains how to pause and resume active emergency messages.
Outlines steps for one panel to take over an active emergency from another.
Lists possible error messages related to amplifiers and loudspeaker lines.
Lists possible error messages for emergency panels and FDS modules.
Details errors related to communication, power supply, and external contacts.
Explains system faults like Eprom read, DSP, watchdog, and data storage failures.
To Next Page