5
SPECIFICATIONS
102
®
System Controller:
Input Level: Music - 100mV or 1V selectable
Voice - Mic or line, selectable, variable
(AGC calibration)
Output Level: 1V nominal
Input Impedance: Music - 2k ohms, balanced, differential
Voice - 600 ohms, balanced, differential
Bass Cut Switch: 6 dB
Distortion: Less than 0.1% THD
CMRR: Greater than 40 dB, all inputs
AGC: Attack level - variable
Attack time - < 5 ms
Release time - 200 ms
Mute: Mute level - -30 dB ( with defeat switch on ch. B)
Attack time - < 5 ms
Release time - 2 seconds
Accessories: 4 rack-mount screws, supplied
Dimensions: 1 3/4" H x 18 31/32" W x 4 1/4" D
(44 mm x 482 mm x 107 mm)
102 Flush-Mount and 102 Surface-Mount Loudspeakers:
Frequency Response: 80 Hz - 18 kHz, ± 3 dB
Distortion: <1% @ 10% rated power input
Driver: Single, 4 1/2" Helical Voice Coil
Enclosure: Dual port, bass reflex type
Volume: 200 cubic inches
Port Resonance: 80Hz
Sensitivity: 95 dB SPL, 1W, 1m @ 1 kHz
Weight: 5 lbs. (2.3 kg)
Temperature: Minimum - 0° C
Maximum - 60° C
Humidity: Minimum - 0 %
Maximum - 98 %
To Next Page
Loading...
Need help?
General
