8
English
Hold the speaker enclosure up to the
hole from behind the bulkhead and find
the best position for the extended
portion of the enclosure. Be sure the
enclosure is hidden behind the bulkhead.
If the enclosure does not fit, use the file
or rasp to enlarge the hole.
Use a half-round file or wood rasp to
smooth out any roughness in the hole
you have cut.
Using the sabre saw, cut the hole for the
speaker, carefully following the line. Take
your time; you want a smooth-edged
circular hole.
Installing Your Speakers From The Rear Of The Bulkhead
Place the mounting flange so that it
interlocks with the enclosure and is flush
with the mounting surface.
A 5
A 6
A 7
A 8
To Next Page
Loading...
