6
SPECIFICATIONS
Input Sensitivity
Impedance:
Capacitance:
Aux. and Tape
Phono
150 mV/ 50k Ohm
2.75 mV/ 47k Ohm, 150 pF
Source and Room
Compensation
Controls:
Low Filter
Low Frequency Control
Narrow Position
Wide Position
High Frequency Control
-3 dB @ 100Hz
-7 dB max. @ 20Hz
±8 dB @ 140Hz
(center frequency)
±1 dB @ 20Hz and 1kHz
±3 dB @ 350Hz
±8 dB @ 50Hz
±8 dB @ 15kHz
±3 dB @ 2.2kHz
Frequency Response: 20 Hz to 20 kHz
Phono RIAA
±0.5 dB
±0.5 dB
Amplifier Power
Output:
40 Watts per Channel minimum
RMS continuous power @ 8
Ohms, THD < .3%
20Hz to 20kHz
IHF Power Bandwidth: 20Hz to 20kHz both channels driven THD <.19%
Intermodulation
Distortion:
.09% IHF 60 Hz/7kHz 4:1 mixed at rated
output
Signal to Noise Ratio: Amplifier
Phono
87 dB A- weighted (below rated
output) inputs shorted
91 dB A- weighted (below rated
output) min. volume
76 dB A- weighted (below rated
output) inputs shorted
Power Requirements: 120 Volts AC 60 Hz
(USA model)
220 Volts AC 50-60 Hz
(export model)
Power Consumption: 360 Watts at rated power
AC Outlets: 1 switched, 1 unswitched 400 watts max.
Dimensions: 18 1/4" x 5 3/4" x 12 1/4" 46.6 (w) x 14.6 (h) x 31.1 (d) cm
Weight: 15 1/2 lbs 7 Kg
To Next Page
Loading...
