16
Enclosure and Baffl e Gasket
Figure 34
Figure 35
Figure 33
8. Enclosure Gasket
8.1 The enclosure and the baffl e have
gaskets to prevent air leaks. The enclosure
gasket is glued as indicated by red arrows
in fi gure 33.
The green arrows indicate the non glued
baffl e gasket. The baffl e gasket may
become dislodged during disassembly.
9. Baffl e Gasket
9.1 The baffl e gasket is placed inside the
channel, located on the outside perimeter
of the baffl e, as indicated by red arrows
shown in fi gure 34.
9.2 If the baffl e gasket is damaged during
disassembly, it is a service part and can be
replaced as shown in fi gure 35.
Note: Make sure that when reinserting the
baffl e gasket, that each end of the gasket
is contacting, ensuring that no air leaks will
occur.
To Next Page
Loading...
