Bose FreeSpace DS 100SE Technical Data Sheet

77
pro.Bose.com
OOFF
88
FreeSpace
®
DS 100SE
Loudspeakers
Product Codes
FreeSpace DS 100SE loudspeaker-Blk PC 040806
FreeSpace DS 100SE loudspeaker-Wht PC 040807
Accessories
On-Wall junction box (6 pack)-Blk PC 041865
On-Wall junction box (6 pack)-Wht PC 041866
In-Wall junction box (6 pack)-Blk PC 041867
In-Wall junction box (6 pack)-Wht PC 041868
Replacement Parts
Speaker bracket-Blk PN 295891-001
Speaker bracket-Wht PN 295891-002
Speaker arm w/screw-Blk PN 299564
Speaker arm w/screw-Wht PN 299565
Grille w/fasteners-Blk PN 299558
Grille w/fasteners-Wht PN 299559
Logo-Blk PN 303038-001
Logo-Wht PN 303038-002
Endcap-Blk PN 299568-001
Endcap-Wht PN 299568-002
2.25" (57mm) driver w/gasket PN 299562
5.25" (133mm) woofer w/gasket PN 299563
How our Loudspeakers are
Measured
1. Power handling
Full-bandwidth pink noise, meeting the IEC
Standard #268-5, is applied to the loudspeaker
and amplified to a level at the loudspeaker
terminals corresponding to the power handling
of the loudspeaker. The loudspeaker must show
no visible damage or measurable loss of perform-
ance after 100 hours of continuous testing.
2. Sensitivity
Full-bandwidth pink noise is applied to the loud-
speaker with its active equalization curve and
amplified to a level at the loudspeaker terminals
corresponding to 1 watt, as referenced to the
nominal impedance. The average sound pressure
level (dB-SPL) is measured at 1 meter from the
speaker in an anechoic environment.
3. Maximum SPL
Full-bandwidth pink noise is applied to the loud-
speaker with its active equalization curve and
amplified to a level at the loudspeaker terminals
corresponding to the long-term rated power
handling of the speaker. The average sound
pressure level (dB-SPL) is measured at 1 meter
from the speaker in an anechoic environment.
4. Frequency range
Sine waves are injected into the loudspeaker, and
the level is adjusted to 1 watt, as referenced to
the nominal impedance, and the level measured
at 1 meter. Resulting graph is smoothed by 0.05
octave-band.
TECHNICAL DATA SHEET
4099_FreeSpace_DS_100SE_TDS 2/26/07 11:01 AM Page 7

Bose FreeSpace DS 100SE Specifications

General

Certification	CE, IEC 529
Product color	White
Housing material	Acrylonitrile butadiene styrene (ABS)
Recommended usage	-
Suitable for outdoor use	Yes
Driver diameter	57 mm
Woofer diameter	133 mm
Number of drivers	2
Speaker enclosure	Ported
Speaker placement	Ceiling-mountable, Wall-mountable
Audio output channels	1.0 channels
Woofer diameter (imperial)	5.25 \
Impedance	8 Ω
Sensitivity	85 dB
Frequency range	75 - 18000 Hz
RMS rated power	- W
Package weight	7700 g
Transformer taps	12.5, 25, 50, 100 W

Weight and Dimensions

Depth	216 mm
Width	381 mm
Height	178 mm
Weight	6400 g
Depth (with stand)	280 mm