Set up the hearing aids
29
2
Power on
Step 1:
To power on,
press and
release the
World Volume
down button
on each
hearing aid.
If you’re wearing the hearing aids, after 3 seconds, you
hear a tone; 6 seconds later, the hearing aids power
on.
Notes:
• This delay gives you time to put on the hearing aids
before the microphones turn on. This helps prevent
the hearing aids from whistling.
• After powering on, the hearing aids enter Bluetooth
pairing mode for 3 minutes. If it takes longer than
that for you to connect them to your phone using
To Next Page
Loading...