Battery 6
57
Charge the hearing aids
WARNING
To avoid risk of injury, use this product only with
an agency-approved power supply, such as a USB
wall charger or computer, that meets local regulatory
requirements (e.g., UL, CSA, VDE, CCC) and complies
with one of the following or equivalent test standards:
IEC 60601-1, IEC 62368-1,
IEC 60065, or IEC 60950-1.
Step 1:
Always make sure that the hearing
aids and charger are dry and clean
before charging.
Step 2:
Connect the small end of the USB
cable to the port on the back of the
charging case.
(continued on next page)
To Next Page
Loading...