Troubleshooting
96
10
Change the domes
Step 1:
Hold the receiver and rmly pull the
current dome off.
Step 2:
Choose a new dome size (see page 94) and/or dome
type (see page 95).
Note:
Each dome can work with either the left or
right hearing aid.
Step 3:
Align the opening of the new
dome with the receiver and slide
the dome rmly onto the receiver
until it ts tightly against the ridge
of the receiver. There should be no
gap between the opening of the
new dome and the ridge of the receiver.
To Next Page
Loading...