If you connected your TV to the VS-2 using a composite video cable, you can use only an S-Video or Composite
connection for your A/V devices even though a device may have HDMI or component video output connectors.
1. Look at the rear panel of each A/V device to determine what type of video output connectors it has.
2. In the
following table, choose the type of video connector that provides the highest possible video quality.
We recommend using an S-Video connection if it is available. Place a check mark in the table for the connec-
tor type used for each of your A/V devices.
Video
Qu
ality
Video
Connector VCR CBL•SAT
AUX
(Other)
Good
S-Video
Standard Composite
Connecting your A/V devices to the VS-2
1. Plug one end of the video cable into the appropriate video output connector on the rear of your A/V device.
2. Plu
g the other end of the video cable into the appropriate Video INPUT connector on the VS-2.
3. Re
fer to your LIFESTYLE
®
system installation guide for information on making audio connections.
To Next Page
Loading...
