Bose Lifestyle 525 Series II Home Theater - System Reset and Remote Pairing

Care and Maintenance
English - 29
Problem What to do
Nosoundfroma
connecteddevice
• Checktheconnections.
• Ifusingacoaxialoropticalaudioconnection,makesureyou
havenotmadebothtypesofconnectionstothesameinput
onthecontrolconsole.
• Makesurethatdeviceisturnedon.
• Refertotheowner’smanualthatcamewiththedevice.
NoTVpicture,butaudio
isheard
• ChecktheTVvideoinputselection.Makesureitiscorrectfor
thevideosource.
• Makesurevideocablesaresecurelyconnected.
Aconnecteddevice
doesnotrespond
consistentlytoremote
commands
TryconnectingtheincludedexternalIRemittertothecontrol
console.Forguidance,presstheSetupbuttononthecontrol
console.Selectthedeviceoptionsandfollowtheonscreen
instructions.
Intermittentaudiodrop-
outsheardoncoaxial
digitalaudioinputs
ContactBoseCustomerServicetorequestacompositevideo
cablethatcanbeusedforthecoaxialdigitalaudioconnection.
Resetting the system
1. PressandholdthePowerbutton onthecontrolconsolefor5seconds
oruntilthesystemstatusindicatoronthecontrolconsolechangestored.
Thesystemstatusindicatoronthecontrolconsolechangestoredwhenthe
systemshutsdown.
2. ReleasethePowerbutton
onthecontrolconsoletorestartthesystem.
Thesystemstatusindicatorchangestoblinkinggreenandthensolidgreen
whenthesystemisonandreadytouse.
3. Ifyoustillcannotoperatethesystemusingtheremote,trythenextprocedure
topairtheremotewiththecontrolconsole.
Pairing the remote with the console
Youmayneedtoperformthisprocedureifyouarereplacingaremoteorif
troubleshootinginstructionsrecommendit.
1. Makesureyoursystemison.Ifnot,pressthePowerbutton
onthe
controlconsole.
2. Holdtheremoteclosetothecontrolconsole.
3. PressandholdboththeMutebutton
onthecontrolconsoleandtheOK
buttonontheremoteatthesametimeforveseconds.Thesystemstatus
indicatorblinkswhenpairingiscomplete.
4. Pressanyremotebuttonandverifythatthesystemstatusindicatoronthe
controlconsoleblinkswitheachbuttonpress.