10 - English
System Setup
D. Connect one end of the audio input cable into the control console Audio OUT
connector. Make sure the flat surface with the arrow on the plug faces up.
You will be asked to connect the other end of the audio input cable while
setting up the contents of the next box.
Audio OUT
E. Connect the power supply output cord into the control console Power
connector.
Power
Power supply
output cord
AC power cord
Power supply
F. Remove a power cord from the power cord box.
G. Connect one end of the power cord into the power supply. Make sure you
push the plug in as far as it can go.
H. Insert the other end of the power cord into a live AC (mains) power outlet.
I. Continue with Box
To Next Page
Loading...
