12 - English
System Setup
CAUTION: DO NOT stand the Acoustimass
®
module on its front or back end.
C. Insert the end of the audio input cable into the Media Center connector
on the Acoustimass module.
Make sure the flat surface with the arrow faces the front of the module.
Media
center
D. Remove a power cord from the power cord box.
E. Connect one end of the power cord into the AC Power connector on the
Acoustimass module. Make sure you push the plug in as far as it can go.
AC power
F. Plug the other end of the power cord into a live AC (mains) power outlet.
G. Continue with Box
To Next Page
Loading...
