Connect the surround speakers to the soundbar
a. On your SoundTouch 300 remote control, press e.
b. Press and hold G until l on the soundbar blinks white.
Once the surround speaker connects, you hear a tone and l
glows white.
NOTE: Connecting may take several minutes.
Set up ADAPTiQ audio calibration
a. Connect the ADAPTiQ headset (included with the soundbar) to the
soundbar’s a connector.
b. Put the headset on your head.
ADAPTiQ
METHOD 2
(CONTINUED)
e
f
ENGLISH
To Next Page
Loading...
